The Club Cannon ShoMaster DMX Controller is designed for SFX professionals looking to have total control of their FX products from 1 unit.
Built specifically for FX operators, this unit will allow you to trigger FX of all kinds. CO2 Jets, Confetti Blowers, Streamers, Fog, Haze, Sparks, and everything in between. The built in timers allow you to track  CO2 use, taking the guess work out of tank changeovers. The timers can also be utilized as a reference for cues calling for a specified duration. A plug and play unit, designed to be used with any CO2 Jet or special FX product with DMX control. Simply link all of your products together with DMX cables, plug in to the controller, and you are ready to go. If your products don't use DMX, use the built in Neutrik True1 AC Outputs, and trigger your products directly from the ShoMaster.
There are several modes pre-programmed into the controller to suit the majority of FX products. These modes can be changed on the fly, using the built in touch screen. If you need a custom mode, no problem. The ShoMaster has 4 customizable modes, with 20 DMX channels each.
FEATURES - 4 sequence buttons - 4 banks with each 4 trigger buttons E-stop - Shows can be saved on USB - Neutrik PowerCON True1 connections 4 relay outputs - LCD touch screen - Multiple CO2 timers - LED illuminated buttons - 5 pin DMX in/out
Size: 23.3 cm x 21.5 cm x 10 cm Weight: 2.75 kg Voltage: 110-240 V Power: 6 W

Club Cannon Shostarter

Complete SFX showcontroller that gives you control over all your SFX equipment.

The Button provides a simple, intuitive interface with vast capabilities. The Button will allow you to trigger CO2 Jets, Confetti Blowers, Streamers, Fog, Haze, Sparks, and everything in between.
FEATURES
- CO2 timer - Big RGB LED illuminated button Safety key switch - Selectable DMX output range - 5 pin DMX output - Selectable DMX safety value - Neutrik PowerCON True1 connections
Size: 11.6 cm x 13.5 cm x 9 cm Weight: 0.82 kg Voltage: 264 V Power: 5 W Control: DMX-512

Club Cannon The Button

A simple & compact DMX effects controller with powerful options

The grandMA3 compact console is the smaller of the two compact models, offering the full system benefits of the grandMA3 system, housed in a compact and lightweight format. Easy to transport, the compact models are ideal for owner/operators and also the console of choice for tech-desk duties.
The compact console features a huge multi-touch monitor, 5 dual encoders and a complete command area almost identical to the larger models.
With 40 physical playbacks, 16 assignable x-keys and a dedicated master area the grandMA3 compact console provides plenty of playback options.
The grandMA3 compact console includes 8 192 control parameters as standard, making it an ideal choice for small and medium sized professional entertainment lighting applications.The system size isscalable to 250 000 parameters with the use of additional grandMA3 processing units. The grandMA3 compact is compatible with grandMA2 and grandMA3 software
Features: -  6 DMX outputs, 1 DMX input -  1 internal foldable monitor multi-touch screen -  1 external multi-touch screen can be connected -  29 rotary RGB backlit encoder -  5 dual encoders -  10 backlit motorized 60 mm faders -  40 separate playbacks -  16 assignable x-keys -  3 etherCON connectors, 5 USB connectors -  2 backlit motorized A/B faders 100 mm -  Individually backlit and dimmable silent (clickless) keys
Size: 75 cm x 60 cm x 27 cm Weight: 33 kg Voltage: 240V

MA Lighting grandMA3 compact control desk, incl. flight case

MA Lighting MA3 Compact XT control desk, incl. flight case

 

The grandMA3 Compact XT console is a robust yet portable lighting control solution, offering the full capabilities of the grandMA3 system in a compact design. Equipped with two large multi-touch monitors, five dual encoders, and extensive playback options including 60 physical playbacks and 16 assignable x-keys, it provides intuitive control for small to medium-sized professional lighting setups.
Featuring 8,192 control parameters as standard, the grandMA3 Compact XT is scalable to handle up to 250,000 parameters with additional processing units, making it suitable for a wide range of applications. It maintains compatibility with both grandMA2 and grandMA3 software, ensuring seamless integration with existing setups.
The console boasts long-life motorized playback faders with color-changing light pipes, enhancing user experience and visibility in various lighting conditions. The dual encoders offer customizable feature-mapping for efficient programming, while the new grandMA3 operating system retains the familiar syntax of grandMA2 while introducing new functionality tailored to user feedback.
The grandMA3 software introduces a refined user interface with improved fixture, feature, and effects-handling, enhancing programming and busking capabilities. Fixture information is now generic, allowing easier data sharing between fixtures, and native support for GDTF ensures accurate control of various fixture types.
Overall, the grandMA3 Compact XT console combines powerful performance with user-friendly design, offering a versatile solution for professional lighting control needs.
Features: -  6 DMX outputs, 1 DMX input -  2 internal foldable monitor multi-touch screens -  1 external multi-touch screen can be connected -  39 rotary RGB backlit encoder -  5 dual encoders -  15 backlit motorized 60 mm faders -  60 separate playbacks -  16 assignable x-keys -  3 etherCON connectors, 5 USB connectors -  2 backlit motorized A/B faders 100 mm -  Individually backlit and dimmable silent (clickless) keys
Size: 93 cm x 60 cm x 27 cm Weight: 40 kg

MA Lighting grandMA3 compact XT control desk, incl. flight case

What do we need to control real devices? DMX outputs! This is where the grandMA3 onPC xPort Nodes come into play. The nodes fulfill two different tasks: They convert Ethernet data to DMX and they can add parameters to your grandMA3 onPC system. So just download the grandMA3 onPC software, connect a grandMA3 onPC xPort Node and you are ready to control your fixtures! The grandMA3 onPC 2Port Node 2k offers you two DMX outputs on the rear panel. The half-width, 1RU chassis is the perfect size for touring or permanent installations. However, you will also find a wide range of accessories for alternative mounting methods or customization. The node directly enables 4 096 parameters - the maximum for your grandMA3 onPC system!
A few more facts? All grandMA3 onPC xPort Nodes can handle MA-Net3, MA-Net2, sACN and Art-Net data. They are fully RDM compliant and have a 3.9" color display on the front for easy configuration and status overview. Especially useful for installations: You can also get the grandMA3 onPC xPort Nodes as PoE (Power over Ethernet) variant! The configuration of your nodes can easily be done via the grandMA3 onPC software. And do not forget - the grandMA3 onPC software offers the same features as the larger consoles. So you get a small, compact and affordable control system without compromising on features for your show!
Size: 51 cm x 33 cm x 27 cm Weight: 20 kg Voltage: 240 V Power: 15 VA Connectors:  PowerCON TRUE1, etherCON/RJ45, DMX512-A Out (5pin XLR female), USB 2.0 (type A) Parameters: 4 096 (HTP/LTP) Parameters Mode2: 1 024 (HTP/LTP)

MA Lighting grandMA3 onPC 2Port Node 2k

Lighting Console:
-  Real-time control of up to 250,000 parameters per session in combination with grandMA3 processing unit -  6 DMX outputs -  1 DMX input -  2 Internal multi-touch screens in foldable monitorwing -  2 Internal letterbox multitouch screens -  2 Internal multi-touch command screens -  2 External multi-touch screens can be connected -  41 Rotatable RGB backlit encoders -  5 Backlit dual encoders -  15 Motorised and backlit 60mm faders -  60 Independent playbacks -  16 Assignable x-keys -  Integrated keyboard drawer -  Built-in uninterruptible power supply (UPS) -  2 Backlit and motorised A / B 100mm faders -  Individually backlit, dimmable and low-noise (clickless) buttons -  Includes dust cover, 2 MA LED desk lights and MA magnetic foil for labelling 15 faders
Connections:
-  1x Power Twist TR1 -  3x etherCON / RJ45 -  6x DMX512-A Out (5pin XLR female) -  1x DMX512-A In (5pin XLR male) -  1x MIDI In (5pin DIN female) -  1x MIDI Out (5pin DIN female) -  1x Linear Timecode In (3pin XLR female) -  1x Audio In (3pin XLR female) -  1x GPI General Purpose Interface (D-SUB DE9 female) for remote control -  2x DisplayPort 1.2 for external screens -  2x S / PDIF in and out -  3x USB 2.0 (Type A) -  3x USB 3.0 (Type A) -  2x LED desk light (4pin XLR female)
Size: 94 cm x 33 cm x 85 cm Weight: 76 kg Voltage: 240 V Power: 300 VA

MA Lighting MA3 Light control desk, incl. flight case

The Magic FX Effectivator 1 is ideal for anyone working with effects. With the Fire button you provide voltage to the schuko output. Equipped with key switch.
The Magic FX Effectivator 1 is a simple 230V switch control for all small devices that need to be activated with a voltage of 230V. This simple control box is equipped with a firing button for firing effects such as the Magic FX Power Shots, Stadium Shots, Power Drops and CO2 Jets. A switch for devices that do not operate on pulse has also been thought of. There is also a normal on-off button for example for a Magic FX Stage Fan.
Size: 33.4 cm x 30.5 cm x 15 cm Weight: 3 kg Voltage: 220-240 V Power: 15A

Magic FX Effectivator 1, incl. flight case

The FXcommanderTM is designed to be a professional while intuitive control solution for SFX and Pyro engineer, it allows to control all DMX device such as SPARKULAR®, FLAMER, FOG, HAZE, CONFETTI etc. in a safe and professional way. Together with our original slaves it can also programming fireworks display wirelessly. Take advantage of the 10.1 inch capacitance touch screen and powerful software system, it allows FX operators edit a show in a few minutes, everything in the system are intuitively designed, no lighting console operation background needed. Large scale shows with special effects and fireworks can be sync with music precisely through our professional windows software FXcommanderTM_Editor. The FXcommanderTM is setting the safety standard for the special effects control. Specifications:  DIMENSION: 314×270×65mm  WEIGHT: 4kg  INPUT: AC 220V/110V, 50/60 Hz  WORK POWER: 20W  Casing material: Aluminium  Battery Powered: Yes  Wireless Function:2.4G wireless DMX Dual band wireless PYRO  Interface: 1*USB, 1*USB Download, 1*LAN, 1* Audio Output, 1*MIDI IN, 1*LTC IN, 1* 3-PIN DMX OUT, 1*5-PIN DMX OUT, 1*External Trigger
Features and advantages Professional DMX&amp;Pyro console  A console for SFX device control and fireworks set off  Customized for SFX operator to control FX device professionally and safely   Next Level Safety for Special Effects Control  Pyro arm switch, DMX arm switch, Deadman button ensure zero false trigger  PANIC – Emergency stop at any time  Safety channel specially designed for SFX device  Dual antenna, ensure fast, stable and reliable PYRO signal transmission  RDMX communication with SHOWVEN device, device status real time monitoring  8 keyboard shortcut key, can set to tap or lock mode, ensure quick and reliable trigger   Intuitive Programming and Operation  10.1″ capacitance touch screen  Presetting device and effect lib for fast programming  5 preset effect rules for easier programming  Easy and fast improvisation programming  Convenient manual pyro firing edit  Demonstration function for programmed show   Powerful   Scene switch, max. support 4 scenes, each scene support 128 cues  USB port support software update, show file update and backup, device lib update etc.  Variety interfaces: 3-pin and 5-pin DMX, MIDI input, LTC input, Audio Output, USB  Wireless:2.4GHz wireless DMX, dual band wireless PYRO  Battery driven with built in battery  Windows FXcommander_Editor Software can generate project list table, minimize operator’s workload.   Precise Control and Sync with Music  Dual-core processor, smooth operation  MIDI, LTC receiver, support SMPTE time code  Windows FXcommander_Editor Software ensure precise programming  Built-in audio signal output, achieve accurate synchronization between music and effects   Personalized Settings  Multi language optional  Unlimited self-editable colors  User defined CUE icon

Showven FX Commander, incl. cables & antenna's

The DAC18 is a compact lighting console designed to control 18 channels either through the DMX line or via analog outputs. Its main advantages include a remarkably shallow installation depth and low power consumption.
Size: 48.3 cm x 13.2 cm x 2.8 cm Weight: 1.5 kg Control: DMX-512 DMX channels: 18

Control Gear