The GX2 is an effect device for the creation of straight flame effects of up to 6m height. The GX2 uses Propane/Buthane bottles as a fuel supply, and can also be used with Aerosol cans by usage of the additional accessory "Aerosol adapter". Another option is the upgrade of the Projector for use with liquid fuels. In this case, the GX2 is modified in a way that it can access an external pumping station with fuels like Bioethanol, ISOPAR or Isopropylalcohol. Regardless of the control variant, the gasprojector always uses a solenoid valve to control the gas or fluid regulation, as well as an electrical high voltage spark for ignition. The usage of different nozzles and fuels influences the effect height and the setting of the effect time can change the form of the effect (Flame ball or fire pillar).
 Size: 26 cm x 26 cm x 39 cm Weight: 5.8 kg Voltage: 230V AC Power: 50 W Control: 230V switchable DMX channels: 2 Output: max 6 m  Consumables: Propane, Butane

Explo GX2, 230 V, excl. hose

The Explo X2 Power Flame can make a propane fire ball up to 20m high. Inside the system a gas tank is installed and liquid propane gas from an external gas cylinder is used to charge the Power Flame unit. It takes about 10 seconds for charging. The Power Flame uses a spark to ignite the pilot flame. This pilot flame must be monitored by the rod flame sensor before big flames can be made. The system is controlled by standard DMX.
Size: 41cm x 41cm x 55cm Weight: 12 kg Voltage: 240 V Power: 100 W Service: DMX-512 Output: max 20 m  Consumables: Liquid propane gas

Explo X2 Power Flame, liquid propane flame effect

The Explo X2 Power Flame can make a propane fire ball up to 20m high. Inside the system a gas tank is installed and liquid propane gas from an external gas cylinder is used to charge the Power Flame unit. It takes about 10 seconds for charging. The Power Flame uses a spark to ignite the pilot flame. This pilot flame must be monitored by the rod flame sensor before big flames can be made. The system is controlled by standard DMX.

The Cauldron Flame System is a perfect substitute for the Olympic Flame Demagnification. It can make propane flame burn up to 1 m high. It runs for about 4 hours for a continuous flame effect. The Cauldron Flame System is designed for use at outdoor events, hotel entrances, casinos or eye-catching parties.
For safety reasons, this system has a safeguard system which is composed of a flame sensing rod and its flame sensing board. Without the solid pilot flame, the effect valve does not open and accordingly, it cannot make the flame burn. The pilot flame strike process repeats until the pilot flame becomes solid and even during the show, when the pilot flame is gone unexpectedly, the pilot re-strike resumes automatically and immediately within 0.3 seconds. When the pilot flame becomes solid, the main valve opens to go in standby state to shoot the flames. During the re-strike process, the main valve stays closed in order to exclude the danger to shoot the flame accidentally. The 1st CH is for the main flame and the CH100 is for the pilot flame. Size: 41 cm x 41 cm x 37 cm Weight: 12.1 kg Voltage: 220 V Power: 70.8 W Control: DMX 512 DMX channels: 2 Output: max 1 m  Consumables: Propane

Hansol Cauldron flame, ∅ 40 cm

The Hansol Cauldron Flame System is a perfect substitute for the Olympic Flame Demagnification. It can make a propane flame burn up to 1m high. It runs for about 4 hours for a continuous flame effect. The Cauldron Flame System is designed for use at outdoor events, hotel entrances, casinos or eye-catching parties.

The Hansol Power Flame I can make a propane fire ball up to 8m high. Inside the system a gas tank is installed and propane gas from an external gas cylinder is used to charge the Power Flame unit. It takes about 10 seconds for charging. The Power Flame uses a spark to ignite the pilot flame. This pilot flame must be monitored by the rod flame sensor before big flames can be made. The system is controlled by standard DMX.
Size: 53 cm x 27 cm x 43 cm Weight: 25 kg Voltage: 240 V Power: 120 W Control: DMX-512 DMX channels: 2 Output: max 8 m  Consumables: Propane gas

Hansol Power Flame 1, (max. 6 m)

The Hansol Power Flame I can make a propane fire ball up to 8m high. Inside the system a gas tank is installed and propane gas from an external gas cylinder is used to charge the Power Flame unit. It takes about 10 seconds for charging. The Power Flame uses a spark to ignite the pilot flame. This pilot flame must be monitored by the rod flame sensor before big flames can be made. The system is controlled by standard DMX.

The Hansol Power Flame II can make a propane fire ball up to 12m high. Inside the system a gas tank is installed and propane gas from an external gas cylinder is used to charge the Power Flame unit. It takes about 10 seconds for charging. The Power Flames uses a spark to ignite the pilot flame. This pilot flame must be monitored by the rod flame sensor before big flames can be made. The system is controlled by standard DMX.
Size: 68 cm x 43 cm x 71 cm Weight: 35 kg Voltage: 240 V Power: 120 W Service: DMX-512 Output: max. 12 m Consumables: Propane gas

Hansol Power Flame 2, (max. 10 m)

The Hansol Power Flame II can make a propane fire ball up to 12m high. Inside the system a gas tank is installed and propane gas from an external gas cylinder is used to charge the Power Flame unit. It takes about 10 seconds for charging. The Power Flames uses a spark to ignite the pilot flame. This pilot flame must be monitored by the rod flame sensor before big flames can be made. The system is controlled by standard DMX.
 

Gas Flames SFX