Explo NiMH Charger

The RX2-20K is a receiver with 20 individually controllable channels. Due to its channelnumber and low size and weight it is especially well suited for indoor events or outdoor shows where flexible positioning of the receivers is important.
Thanks to a seperatly available mount it can be easily be mounted on angle shot systems or truss constructions, which allows for a space saving design of your shows.
Thanks to the bidirectional radio control important stati of the receiver (Ohm measurements on every channel, battery status and many more) can be checked at the transmitter.
The RX2-20K allows for extremely fast ignitions in steps of 10ms. Thusly there are no boundaries for the showdesign.
FEATURES: -  Ohm measurement on every single channel.
-  Safe, multiple times encrypted radio control.
-  Watertight design protects optimal from rain.
-  Powerful NiMH-battery.
-  Extremely long standby.
Technicals details:
Channels:                            20 Ignition Energy:                   45-50V / 5x 330uF Measurements:                    400 x 71 x 58mm
weight:                                1,1kg Power supply:                       1x NiMH-Akku 12VDC
Case:                                   Powder coated aluminium  Radio range:                         800m Standby:                               40h / 80h (sleep-mode)

Explo RX2-20K receiver

The RX2-20K is a receiver with 20 individually controllable channels. Due to its channelnumber and low size and weight it is especially well suited for indoor events or outdoor shows where flexible positioning of the receivers is important.

Explo RX2-30K receiver

The RX2-70K is a receiver with 70 individually controllable ignition channels. Thanks to its large number of channels and sturdy case it is especially well suited for outdoor shows, that require many different ignitions.
Thanks to the bidirectional radio control important stati of the receiver (Ohm measurements on every channel, battery status and many more) can be checked at the transmitter.
The RX2-70K allows for extremely fast ignitions in steps of 10ms. Thusly there are no boundaries for the showdesign.
FEATURES: -  Ohm measurement on every single channel. -  Safe, multiple times encrypted radio control. -  Sturdy outdoor case with flame retardant coating. -  Watertight design protects optimal from rain. -  Powerful NiMH-battery. -  Extremely long standby. -  Confetti-Mode to ignite single Confetti-Shooter.
Technical details:
Channels:                        70 Ignition Energy:               30-80V / 4x 330uF Measurements:                335 x 290 x 155mm
Weight:                           4,7kg Power Supply:                  2x NiMH-batteries 12VDC
Case:                              HPRC-Case Radio range:                    800m Standby:                         70h / 140h (Sleep-Mode)

Explo RX2-70K receiver

The RX2-70K is a receiver with 70 individually controllable ignition channels. Thanks to its large number of channels and sturdy case it is especially well suited for outdoor shows, that require many different ignitions.

The Timecode Modem is used to synchronize the Explo system with an external Timecode, and was specifically developed to be used with Explo transmitters (TX2-Stage or TX2-70K). It allows for reading of SMPTE- and MIDI Timecodes, as well as writing MIDI Timecodes.
A connection cable for both types of transmitters is included, as well as a charger for the built in NiMH-battery.
FEATURES:
-  TC-Modem, specifically designed for the X2 series. -  Simple, intuitive use. -  Cost-efficient alternative to third-party TC-Modems.
Technical details:
Measurements:                       220 x 155 x 65mm
Weight:                                  1,8kg Power supply:                         2x NiMH-Battery 12VDC Case:                                     Aluminium case Standby:                                7 hours Supported TCs:                       SMPTE (Read), Midi (Read / Write)

Explo TCM timecode modem

The Timecode Modem is used to synchronize the Explo system with an external Timecode, and was specifically developed to be used with Explo transmitters (TX2-Stage or TX2-70K).

The TX2-70K is a transmitter used to control all explo receivers featuring the bidirectional radio control. Apart from manual ignition, you can also start preprogrammed automated shows from the transmitter, during which receivers and the transmitter, will synchronize by use of an internal Time Code.
Thanks to its sturdy, weathertight and flame retardant casing, this transmitter is especially well suited for outdoor shows. The ten freely programmable spare channels, which can even be programmed to start seequences at any time, make it a great partner for indoor shows as well.
FEATURES: -  Sturdy outdoor casing made of flame retardant material. -  Ten freely programmable spare keys. -  Powerful NiMH-battery. -  Control for up to 8.000 sigle ignitions with the AutoShow. -  Synchronization via FSK Timecode already built in. -  Safe, multiple times encrypted radio transmission.
Technical details:
Measurements:                      335 x 290 x155mm
Weight:                                  4,6kg Power Supply:                        2x NiMH-Battery 12VDC
Case:                                     HPRC-Case Radio range:                           800m Standby:                                16 hours

Explo TX2-70K transmitter

The TX2-70K is a transmitter used to control all explo receivers featuring the bidirectional radio control.

The TX2-Stage is a bidirectional transmitter of the X2-series, used to control receivers either via manual ignition signals, the AutoMode, or PC-Mode. Thanks to its small size it is especially well suited for smaller outdoorshows, stage pyrotechnics, or as a backup transmitter.
FEATURES: -  Safe, multiple times encrypted radio transmission. -  Powerful NiMH-battery. -  Control for up to 8.000 sigle ignitions with the AutoShow. -  Compact and handy design.
Technical details:
Measurements:                             85 x 170 x 50mm
Weight:                                        680g Power Supply:                               1x NiMH-battery 12VDC
Case:                                           Plastic Radio range:                                 400m Standby:                                      24 hours

TX2-Stage transmitter

The TX2-Stage is a bidirectional transmitter of the X2-series, used to control receivers either via manual ignition signals, the AutoMode, or PC-Mode. Thanks to its small size it is especially well suited for smaller outdoorshows, stage pyrotechnics, or as a backup transmitter.